This is the large particle (< 5 µ m) exposure chamber. Exposure chamber for rat cages 24x24x35 inches (61x61x89 cm) will fit 4 rat cages (19×10.5×8.5″). Door is removable and held on with 8 camlock fasteners and sealed with closed pore gasket material. The flow through the chambers is from top to bottom using a …
Category Archives: Exposure chambers & hoods
Large Rat Exposure Chamber
The exposure chamber for rat cages 36x24x24 inches (91x61x61 cm) will fit 6 rat cages (19 x 10.5 x 8.5″). Drawing showing different configurations of mice and rat cages. Doors are removable and held on with 8 cam lock fasteners and sealed with closed pore gasket material. The flow through the chambers is from side …
Mouse Exposure Chamber
The exposure chamber is for mouse cages 28x19x15 inches (71x48x38 cm) and will fit 8 mouse cages (10.5×7.4.5 inches). The picture shows two units placed together with locking wheels. The doors are removable and are held on with 8 cam lock fasteners and sealed with closed pore gasket material. Flow through chambers is from one …
Rat Exposure Chamber
The exposure chamber for rat cages 28 x 24 x 24 inches (71x61x61 cm) will fit 4 rat cages (19×10.5×8.5 in). The picture shows two units placed together with locking wheels. Doors are removable and held on with 8 cam lock fasteners and sealed with closed pore gasket material. The flow through the chambers is …
Cage Insert
The “cage insert” is an aerosol delivery unit designed to be placed into a standard polycarbonate cage for animal exposures. The aerosol is introduced into the cyclone-type top and distributed through a fine, mesh, perforated screen. Aerosol distributions of aerodynamic diameters with a mean diameter of 3 micrometers have been tested for distribution and found …
Small Hood
The small hood is 24 x 20 x 19 inches (61x51x48 cm) and is used with the TE-2 manual smoking machine. A high-pressure. high-volume fan provides suction from the back through a filter that exits through a 3-inch duct to the external ductwork. Extra-capacity exhaust provides the flexibility to add other exposure chambers or for …
Standard Smoking Machine Hood
The hood area is 30x24x21 inches (76x61x53 cm) with filter in area back of the TE-10 smoking machine. The errant smoke is captured from the smoking machine to keep exposure area free of smoke. Below the TE-10 unit is the mixing and dilution (m&d) chamber which collects the side-stream and mainstream smoke from the TE-10 …